OneCNC Series Updates

This is a history of all OneCNC updates.

You may notice sometimes there can be a jump in version numbers.

This is due to intensive and continual internal testing where we thoroughly test versions before releasing proven functional updates.


To download updates, see our OneCNC Updates page.

OneCNCXR8 Release 62.56

We released today OneCNCXR8 version 62.56

The major changes in this release are:

Pocket Entry point
Select pocket custom start point this is only available within one pocket boundary selection.
Pre-selecting multiple pockets by automatic selection the custom selection ability is greyed out.
There was an adjustment to this logic to better handle islands withing the boundary.

Planes Dialog
Termination while using planes dialog was caused if each function was not completed so we made adjustments in this dialog to automatically complete.

Toolpath Template
The number of templates control logic was adjusted

Translation
Korean language translation update was added to this release

Pocket Cutter Comp
The lead in cutter comp logic was changed to better handle islands finish passes with islands.

This OneCNCXR8 62.56 is now available in the OneCNC update server.

Read More...

OneCNCXR8 Release 62.52

OneCNCXR8 62.52 Released

These are the main changes in this version

Lathe cycle line numbers
Lathe turn rough with finish line numbering was adjusted.

Languages
Japanese Language
Updated language added

Lathe Turn Rough Boundary
Lathe turn rough boundary had some adjustments to maintain correct boundary control.

Lathe Turn Finish
Lathe turn finish had a start problem in certain non-straight entries.

Dimensions
Dimension line prints but not shown on screen

Profile Wall taper
Wall taper in profile had a problem on direction of taper angle which was changed

Profile
Profile taper and vertical was adjusted for finish with cutter comp setting
Profile taper and vertical was adjusted for the finish at bottom only setting

OneCNCXR8 Version release 62.52 is available in the OneCNC update server for XR8 licenced users

Read More...

OneCNCXR8 Release 62.43

OneCNCXR8 Release 62.43 is now released

This is what the major changes are in this version.

New Functionality

This new functionality is in all Milling versions including Multi Axis Milling and Multi Axis Lathe versions

This new feature is in Profile function where you can also use the taper tool support to perform bevelling of all angles using taper tools of all angles .

This essentially a profile function can now be used for bevelling of all angles using tapered tools from the tapered tool library.

Although if Chamfer tool library tools are used angle is restricted to angles of 45 Deg.

Tools in the taper tool library are designated by the bottom or tip diameter and the taper can be any custom angle.
The larger diameter of the tapered tool is automatically determined by the angle and the flute length. 

This new function allows the profile to be used for angle bevelling however if the corners are required sharp they need to be selected singularly with lead-in lead out of 0 Deg. that way the corners would be sharp.in the case of a square block

Tools in the chamfer tool library are known by the major diameter not by the tip diameter and a fixed angle of 45Deg.so it is always best to use tools from the taper tool library.

profile.

OneCNCXR8 has taper tool support is mainly for pocketing 3D roughing and finishing but can also nan now be easily used for chamfer machining using tools from the taper tool library.

This new dialog seen above only appears if a tapered tool is selected from the taper tool library.

If selected from the chamfer tool library but that one is fixed at 45Deg..

The normal method of using the tool on a taper angle allows for a chamfer of larger size than the tool diameter which is how the function was designed. Now there is vertical control where the chamfer is able to be cut in one pass using Z levels in a confined space such as holes even counterbored holes where there is not enough room to go down the angle method.

profile 2

Machining STL Models
Some STL models could not be machined in XR8 this has now been rectified in this release

3D to 2D Pages Function
3D to 2D drawing function was not working as expected on all models.
The preview image and the actual result 2D drawing was missing many lines in 64 bit versions.

Language Translation
Chinese Translation simplified and traditional has been updated in this version.

Lathe Groove
When Groove Direction was set to 'Bi-directional' for groove roughing toolpath it sometimes left one 'step over' at the right end of the groove.

Lathe Posting
A report that Lathe outputs 'MILL TOOL FORMAT End Lines' instead of 'TURN TOOL FORMAT End Lines was fixed in this version.

Mill Pocketing
The Last cut override finish speeds was not working correctly for Traditional or Zigzag last cut style and this has been rectified in this release.

Mill Facing
It was found that Mill Facing in One direction that climb milling changed to conventional if toolpath angle was set over 91.7°

Clean Circle Function
Retract at feed speed not working correctly in Clean has been corrected in this release.

Pocketing
Retract at feed speed not working correctly in pocketing has been corrected in this release.

3D to 2D Pages Function
We had user requests to retain 3D to 2D pages data if file is opened and saved in an Express version and this has now been implemented in this release.

Version Release OneCNCXR8 62.43 is available in the update server for all licenced OneCNCXR8 users next week.

Read More...